Biological conversion pathways of sulfate reduction ammonium oxidation in anammox consortia

• The SRAO phenomena tended to occur only under certain conditions. • High amount of biomass and non-anaerobic condition is requirement for SRAO. • Anammox bacteria cannot oxidize ammonium with sulfate as electron acceptor. • AOB and AnAOB are mainly responsible for ammonium conversion. • Heterotrophic sulfate reduction mainly contributed to sulfate conversion. For over two decades, sulfate reduction with ammonium oxidation (SRAO) had been reported from laboratory experiments. SRAO was considered an autotrophic process mediated by anammox bacteria, in which ammonium as electron donor was oxidized by the electron acceptor sulfate. This process had been attributed to observed transformations of nitrogenous and sulfurous compounds in natural environments. Results obtained differed largely for the conversion mole ratios (ammonium/sulfate), and even the intermediate and final products of sulfate reduction. Thus, the hypothesis of biological conversion pathways of ammonium and sulfate in anammox consortia is implausible. In this study, continuous reactor experiments (with working volume of 3.8L) and batch tests were conducted under normal anaerobic (0.2≤DO<0.5 mg/L) / strict anaerobic (DO<0.2 mg/L) conditions with different biomass proportions to verify the SRAO phenomena and identify possible pathways behind substrate conversion. Key findings were that SRAO occurred only in cases of high amounts of inoculant biomass under normal anaerobic condition, while absent under strict anaerobic conditions for same anammox consortia. Mass balance and stoichiometry were checked based on experimental results and the thermodynamics proposed by previous studies were critically discussed. Thus anammox bacteria do not possess the ability to oxidize ammonium with sulfate as electron acceptor and the assumed SRAO could, in fact, be a combination of aerobic ammonium oxidation, anammox and heterotrophic sulfate reduction processes.     

Enhanced debromination of 2,2′,4,4′-tetrabromodiphenyl ether (BDE-47) by zero-valent zinc with ascorbic acid

• Highly efficient debromination of BDE-47 was achieved in the ZVZ/AA system. • BDE-47 debromination by the ZVZ/AA can be applied to a wide range of pH. • AA inhibits the formation of (hydr)oxide and accelerates the corrosion of ZVZ. • Reduction mechanism of BDE-47 debromination by the ZVZ/AA system was proposed. A new technique of zero-valent zinc coupled with ascorbic acid (ZVZ/AA) was developed and applied to debrominate the 2,2′,4,4′-Tetrabromodiphenyl ether (BDE-47), which achieved high conversion and rapid debromination of BDE-47 to less- or non-toxic forms. The reaction conditions were optimized by the addition of 100 mg/L ZVZ particles and 3 mmol/L AA at original solution pH= 4.00 using the solvent of methanol/H₂O (v:v= 4:6), which could convert approximately 94% of 5 mg/L BDE-47 into lower-brominated diphenyl ethers within a 90 min at the ZVZ/AA system. The high debromination of BDE-47 was mainly attributed to the effect of AA that inhibits the formation of Zn(II)(hydr)oxide passivation layers and promotes the corrosion of ZVZ, which leads to increase the reactivity of ZVZ. Additionally, ion chromatography and gas chromatography mass spectrometry analyses revealed that bromine ion and lower-debromination diphenyl ethers formed during the reduction of BDE-47. Furthermore, based on the generation of the intermediates products, and its concentration changes over time, it was proposed that the dominant pathway for conversion of BDE-47 was sequential debromination and the final products were diphenyl ethers. These results suggested that the ZVZ/AA system has the potential for highly efficient debromination of BDE-47 from wastewater.     

Degradation of polyacrylamide (PAM) and methane production by mesophilic and thermophilic anaerobic digestion: Effect of temperature and concentration

• PAM degradation in thermophilic AD in comparison with mesophilic AD. • PAM degradation and its impact on thermophilic and mesophilic AD. • Enhanced methane yield in presence of PAM during thermophilic and mesophilic AD. • PAM degradation and microbial community analysis in thermophilic and mesophilic AD. Polyacrylamide (PAM) is generally employed in wastewater treatment processes such as sludge dewatering and therefore exists in the sludge. Furthermore, it degrades slowly and can deteriorate methane yield during anaerobic digestion (AD). The impact or fate of PAM in AD under thermophilic conditions is still unclear. This study mainly focuses on PAM degradation and enhanced methane production from PAM-added sludge during 15 days of thermophilic (55°C) AD compared to mesophilic (35°C) AD. Sludge and PAM dose from 10 to 50 g/kg TSS were used. The results showed that PAM degraded by 76% to 78% with acrylamide (AM) content of 0.2 to 3.3 mg/L in thermophilic AD. However, it degraded only 27% to 30% with AM content of 0.5 to 7.2 mg/L in mesophilic AD. The methane yield was almost 230 to 238.4 mL/g VSS on the 8th day in thermophilic AD but was 115.2 to 128.6 mL/g VSS in mesophilic AD. Mechanism investigation revealed that thermophilic AD with continuous stirring not only enhanced PAM degradation but also boosted the organics release from the sludge with added PAM and gave higher methane yield than mesophilic AD.     

“竞争申请制”:可持续发展政策试点与央地关系重构

可持续发展目标(SDGs)的提出,开启了人类可持续发展领域最宏大的政策实验,也为开展国际视野的比较公共政策研究提供了难得机遇。执行SDGs及国家可持续发展政策需要处理好中央政府与地方政府间关系,而政策试点是协调这一关系的重要政策工具。已有文献对经济政策试点做了较充分的研究,然而对旨在实现经济、社会与环境协调的可持续发展政策试点,现有研究尚缺乏成型理论。在复杂央地关系格局下,对于需持续投入成本且成果难以界定的可持续发展政策试点,其具有怎样的不同于经济政策试点的机制?此外,众多西方学者将美国作为政策试点研究的制度基础并视其为“民主实验室”。然而,政策试点在以中国为代表的不同体制国家中同样存在,并以多样的机制发挥作用。那么,不同国家体制内的可持续发展政策试点又有哪些异同?政策试点影响下中国既有的央地关系发生了怎样的重构?对此,本文基于最典型案例原则,选取中国与美国响应SDGs分别开展的政策试点进行比较研究。笔者识别了不同体制下试点机制的异同,指出中国基于“竞争申请制”开展的可持续发展政策试点强化了中央部委与地方政府间关系,形成了地方官员的可持续发展激励,保障了政策试点的实施。     

不同喷雾方式下低阻文丘里振弦栅除尘配置优化实验研究

为了对比径向外喷和轴向喷雾下的低阻文丘里振弦栅耦合除尘效果，以除尘效率和系统阻力为参照，选定喉管气速、振弦栅数、纤维丝间隙和喉管液气比进行单因素实验。结果表明2种喷雾方式的除尘效率和系统阻力的变化趋势相同。利用SPSS软件进行4因素3水平正交实验设计，在特定参数条件下，2种喷雾方式的因素影响排序相同，除尘效率为纤维栅数＞纤维丝间隙＞喉管气速＞喷雾量；系统阻力为喉管气速＞纤维栅数＞纤维丝间隙＞喷雾量；径向外喷最佳配置为喉管气速24 m/s、喷雾量2.3 L/min、2块间隙为0.8 mm纤维栅板；轴向喷雾为喉管气速28 m/s、喷雾量2.4 L/min、2块间隙为0.8 mm纤维栅板；在最优配置下的除尘性能为径向外喷＞轴向喷雾。     

英国国防工业安全生产法制体系研究及对我国的启示

为建立健全我国国防工业安全生产法制体系，从构建历程、宏观设计和微观建设要点等方面对英国国防工业安全生产法制体系展开系统研究，并分析当前我国国防工业安全生产法制体系存在的主要问题以及英国国防工业安全生产法制体系建设对我国的启示。结果表明:在宏观设计方面，英国构建以国防安全局为监管主体的高度扁平化监管体系；在微观建设方面，其更加注重国防工业安全生产法律体系的层次性、内容完备性，法律的实操性、更新机制，以及监管职责界定的建设。借鉴英国经验，指出将国防工业安全生产法制体系建设提升至国家战略高度，实现国防工业安全生产专门立法、强化法律可操作性、完善法律制修订机制和科学界定监管职责是我国今后努力的重要方向。     

基于数字信息化的消防呼吸气瓶检验管理系统研究与开发

为解决碳纤维缠绕式消防呼吸气瓶检验中因单机作业而存在的检验效率低、检验质量差、受人为因素影响的问题，研究开发基于数字信息化的碳纤维缠绕式消防呼吸气瓶检验管理系统，该检验系统包括消防呼吸气瓶数据库、OA系统、呼吸气瓶检验软件和手机APP。利用二维码技术和计算机网络，实现呼吸气瓶数据库、检验软件、OA约检和报告审核审批系统、手机APP的数据传输。结果表明:该检验管理系统实现了呼吸气瓶检验的无纸化、过程的可追溯性、检验结果的防伪性等功能，其对于碳纤维缠绕式消防呼吸气瓶检验具有较强的适用性和可行性。     

“三线一单”促进四川省高质量发展

过去40年来我国经济建设取得了举世瞩目的成绩,但是也留下了很多生态环境问题。目前我国经济已经由高速增长阶段转向高质量发展阶段,但高质量发展缺乏指标体系和具体路径。“三线一单”是一套生态环境分区管控体系,其主要目的是统筹地方社会经济与环境保护的矛盾,促进经济结构转型。四川省在“三线一单”编制过程中,通过建立指标体系从生态环境保护的角度为地区高质量发展提供了量化标准,通过差异化管控要求为地区高质量发展提供了具体路径,从生态环境角度助力高质量发展。     

“互联网+”智慧环保生态环境多元感知体系发展分析

在大数据技术以及信息化快速稳定持续发展的实践背景之下,"互联网+"智慧环保发展时代的悄然来临,使得对"互联网+"智慧环保多元感知体系的研究与发展工作,逐步被提升到了极其重要的地位。文章结合雄安新区生态环境智慧监测体系建设项目,展开了简要的阐释分析。     

肥煤自燃全过程热动力学特征参数研究

实验测定了林西矿肥煤样品30~900℃煤自燃全过程热动力学特征参数,得出:TG/DTG曲线显示煤样DTG初始临界温度45℃,干裂温度122℃,活性温度195℃,增速温度265℃,质量极大值温度342℃,着火温度465℃,最大热失重速率温度515℃和燃尽温度690℃;DSC曲线显示,煤样初始放热温度60℃、最大热释放速率温度511℃。结合TG-DTG-DSC曲线综合分析可知,煤温达到510℃左右时煤样反应最剧烈。由煤自燃标志气体测定实验系统得出:煤温130℃后CO,CO 2释放量迅速增加,210℃增加速度下降;CH 4,C 2 H 6含量变化具有规律性且两者变化相近;C 2 H 4出现温度为130℃;C 2 H 4/C 2 H 6比值在190~350℃有较强的规律性,呈上升趋势且上升速度较快;350℃之后,CH 4,C 2 H 6,C 2 H 4体积分数均开始急剧增大;C 2 H 4/CO与C 2 H 4/CO 2变化趋势大致相同,在130~350℃时缓慢增长,达到350℃后比值呈指数形式上升。经拟合曲线,得到活化能的3个突变点温度:70,180,220℃,其中180℃与交叉点温度相吻合。通过以上研究,得到了肥煤自燃全过程的热力学特征参数,为实际生产中防治煤自燃提供了理论依据。